Audible/Visual Signaling Appliances

Audible/Visual Signaling Appliances

GHLF Series

The GHLF Series is a low profile, low frequency audible appliance that offers a 520 Hz square wave audible alarm with the most efficient (dBA to mA ratio) current draw available.

The GHLF Series produces a temporal 3 tone with a jumper selection for normal or loud decible tone.  Listed to ANSI/UL 464, CAN/ULC, applicable IBC/IFC/IRC Standards and NFPA 72.

 

Standard Features

  • Lower installation and operating costs
  • Nominal voltage 24VDC
  • Features SuperSlide® bracket – ease of supervision testing
  • Features Checkmate® – instant voltage verification
  • Synchronize horn with Gentex GTSM control module
  • Prewire entire system, install mounting bracket, then instsall signals
  • Input terminals 12 to 18 AWG
  • Produces a 520Hz square wave, temporal 3 tone
  • Jumper selection for normal or loud dBA
  • Temporal 4 pattern available when used with Gentex GTSM control module
  • Tamperproof re-entrant grill and locking screw
  • Faceplate available in red or off-white

GHSLF Series

The GHSLF Series is a high quality, low profile, low frequency audible and visible appliance that offers a dependable audible and visual alarm.  

The GHSLF Series produces a 520 Hz square wave, temporal 3 tone with a jumper selection for normal or loud decible tone.  The GHSLF is offered in a fixed 15, 110 and 177 candela strobe.  Listed to ANSI/UL 1971, ANSI/UL 464, CAN/ULC S525 and CAN/ULC S526, applicable IBC/IFC/IRC Standards and NFPA 72.

 

Standard Features

  • Nominal voltage 24VDC
  • Features SuperSlide® bracket – ease of supervision testing
  • Features Checkmate® – instant voltage verification
  • Fixed candela options: 15, 110 and 177 
  • Synchronize horn and strobe with Gentex GTSM control module
  • Prewire entire system, install mounting bracket, then instsall signals
  • Input terminals 12 to 18 AWG
  • Produces a 520Hz square wave, temporal 3 tone
  • Jumper selection for normal or loud dBA
  • Temporal 4 pattern available when used with Gentex GTSM control module
  • Tamperproof re-entrant grill and locking screw
  • Faceplate available in red or off-white

Commander4 Series(GCS and GCC Series)

The GCS/GCC Series is a ceiling mount strobe (GCS) or combination horn/strobe (GCC) that offers dependable audible and visual alarms.

The GCS/GCC offers field selectable candela options of 15, 30, 75, 95, 115 and 150 candela. Listed to ANSI/UL 464 and ANSI/UL 1971, CAN/ULC listed, applicable IBC/IFC/IRC Standards, FM, and NFPA 72.

Standard Features

  • Lower installation and operating costs
  • Nominal voltage 24VDC
  • Features SuperSlide® bracket – ease of supervision testing
  • Features Checkmate® - instant voltage verification
  • Synchronize strobe and/or horn by using Gentex AVSM control module
  • Prewire entire system, install mounting bracket, then install signals
  • Input terminals 12 to 18 AWG
  • Switch selection for high or low dBA
  • Switch selection for 2400Hz or mechanical tone
  • Switch selection for continuous or temporal 3 audible signal
  • Tamperproof re-entrant grill
  • Surface mount with the GCSB (Gentex Ceiling Surface Box)
  • Silence audible while visual appliance will remain flashing
  • Rugged die cast metal mounting bracket
  • ALERT text available as an accessory
  • Faceplate available in red or off-white

Commander3 Series(GES3 and GEC3 Series)

The GES3/GEC3 Series is a wall mount strobe (GES3) or combination horn/strobe (GEC3) that offers dependable audible and visual alarms.

The GES3/GEC3 Series are available in 12VDC or 24VDC models with field selectable candela options of 15, 30, 60, 75 and 110 (24VDC only). Listed to ANSI/UL 464 and ANSI/UL 1971, CAN/ULC listed, applicable IBC/IFC/IRC Standards and NFPA 72.

Manuals

Standard Features

  • Lower installation and operating costs
  • Nominal voltage 12VDC and 24VDC
  • Features SuperSlide® bracket – ease of supervision testing
  • Features Checkmate® – instant voltage verification
  • Synchronize strobe and/or horn by using Gentex AVSM control modules
  • Prewire entire system, install mounting bracket, then install signals
  • Input terminals 12 to 18 AWG
  • Switch selection for high or low dBA
  • Switch for chime, whoop, 2400Hz or mechanical tones
  • Switch for continuous or temporal 3 audible signal
  • Tamperproof re-entrant grill
  • Surface mount with the GSB (Gentex Surface Box)
  • Silence audible while visual appliance will remain flashing
  • Rugged die cast metal mounting bracket
  • ALERT and AGENT text bezel available as an accessory
  • Faceplate available in red or off-white

Commander2 Series(GES, GEC and GEH Series)

The GES/GEC/GEH Series is a low profile strobe (GES), combination horn/strobe (GEC) or horn (GEH) that offers dependable audible and visual alarms.

The GES/GEC offers fixed candela models of 15/75 and 177 candela. Listed to ANSI/UL 464 and ANSI/UL 1971, CAN/ULC listed, applicable IBC/IFC/IRC Standards and NFPA 72.

Standard Features

  • Lower installation and operating costs
  • Nominal votage 24VDC
  • Features SuperSlide® bracket – ease of supervision testing
  • Features Checkmate® - instant voltage verification
  • Synchronize strobe and/or horn by using Gentex AVSM control module
  • Prewire entire system, install mounting bracket, then install signals
  • Input terminals 12 to 18 AWG
  • Switch selection for high or low dBA
  • Switch selection for chime, whoop, mechanical and 2400Hz tone
  • Switch selection for continuous or temporal 3 (not available on whoop tone) audible signal
  • Tamperproof re-entrant grill
  • Surface mount with the GSB (Gentex Surface Box)
  • Silence audible while visual appliance will remain flashing
  • Rugged die cast metal mounting bracket
  • ALERT and AGENT text bezel available as an acessory
  • Faceplate available in red or off-white

Mass Notification Commander4 Series

The GCS/GCC Colored Lens Series is a ceiling mount strobe (GCS) or combination horn/strobe (GCC) that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation and emergency response.

The GCS/GCC Colored Lens Series offers field selectable candela options of 15, 30, 75, 95 and 115. Colored lens colors include amber, blue, green and red. Listed to ANSI/UL 464, ANSI/UL 1638, CAN/ULC listed, applicable IBC/IFC/IRC Standards and NFPA 72.

Standard Features

  • Lower installation and operating costs
  • Nominal voltage 24VDC
  • Lens colors available: amber, blue, green and red
  • Features SuperSlide® - ease of supervision testing
  • Features Checkmate® - instant voltage verification
  • Synchronize strobe and/or horn by using Gentex AVSM control module
  • Prewire entire system, install mounting bracket, then install signals
  • Input terminals 12 to 18 AWG
  • Switch selection for high or low dBA
  • Switch selection for 2400Hz or mechanical tone
  • Switch selection for continuous or temporal 3 audible signals
  • Tamperproof re-entrant grill
  • Surface mount with the GCSB (Gentex Ceiling Surface Box)
  • Silence audible while visual appliance will remain flashing
  • Rugged die cast metal mounting bracket
  • ALERT text bezel available as an accessory
  • Faceplate available in red or off-white

Mass Notification Commander3 Series

The GE3 Colored Lens Series is a wall mount strobe (GES) or combination horn/strobe (GEC) that offers dependable audible and visual alarms for warning and emergency notification. Applications include severe weather, evacuation and emergency response.

 
The GE3 Colored Lens Series offers field selectable candela options of 15, 30, 60, 75 and 110. Colored lens colors include amber, blue, green and red. Listed to ANSI/UL 464, ANSI/UL 1638, CAN/ULC listed, applicable IBC/IFC/IRC Standards and NFPA 72.

Standard Features

  • Lower installation and operating costs
  • Nominal voltage 24VDC
  • Lens colors available: amber, blue, green and red
  • Features SuperSlide® - ease of supervision testing
  • Features Checkmate® - instant voltage verification
  • Synchronize strobe and/or horn by using Gentex AVSM control module
  • Prewire entire system, install mounting bracket, then install signals
  • Input terminals 12 to 18 AWG
  • Switch selection for high or low dBA
  • Switch Selection for chime, whoop, 2400Hz or mechanical tone
  • Switch for continuous or temporal 3 audible signals
  • Tamperproof re-entrant grill
  • Surface mount with the GSB (Gentex Surface Box)
  • Silence audible while visual appliance will remain flashing
  • Rugged die cast metal mounting bracket
  • ALERT and AGENT text bezel available as an accessory
  • Faceplate available in red or off-white

WGE Series(WGES and WGEC Series)

The WGES/WGEC Series is a wall mount, outdoor listed strobe (WGES) or combination horn/strobe (WGEC) that offers dependable audible and visual alarms.

The WGES/WGEC offers a fixed 75 candela strobe and is shipped as a kit with either the GOE or GOELP enclosure. Listed to ANSI/UL 464 and ANSI/UL 1638, CAN/ULC listed, applicable IBC/IFC/IRC Standards and NFPA 72.

Standard Features

  • Lower installation and operating costs
  • Nominal voltage 24VDC
  • Kit includes GOE or GOELP enclosure and WGES24 or WGEC24
  • Features SuperSlide® bracket – ease of supervision testing
  • Features Checkmate® – instant voltage verification
  • Synchronize strobe and/or horn by using Gentex AVSM control module
  • Prewire entire system, install mounting bracket, then install signal
  • Input terminals 12 to 18 AWG
  • Switch selection for high or low dBA
  • Switch selection for chime, whoop, 2400Hz or mechanical tone
  • Switch selection for continuous or temporal 3 audible signal
  • Tamperproof re-entrant grill
  • Silence audible while visual appliance will remain flashing
  • Rugged die cast metal mounting bracket
  • GOE and GOELP made of clear Lexan® providing maximum visibility and reliability for effective visible signaling – allowing full 75 candela output
  • Faceplate available in red or off-white

Mass Notification WGE Series

The WGES/WGEC Outdoor Colored Lens Series is a wall mount strobe (WGES) and combination horn/strobe (WGEC) that offers dependable audible and visual alarms. offers dependable visible and/or audible alarms for warning and emergency notification in outdoor locations. Applications include severe weather, emergency response and many more.

The WGES/WGEC Outdoor Colored Lens Series offers a fixed 75 candela strobe, has colored lens available in amber, blue, green and red colors and is shipped as a kit with either the GOE or GOELP enclosure. Listed to ANSI/UL 464 and ANSI/UL 1638, CAN/ULC listed, applicable IBC/IFC/IRC Standards and NFPA 72.

Standard Features

  • Lower installation and operating costs
  • Nominal voltage 24VDC
  • Kit includes GOE or GOELP enclosure and WGES or WGEC
  • Lens colors available: amber, blue, green, red
  • Features SuperSlide® bracket – ease of supervision testing
  • Features Checkmate® - instant voltage verification
  • Synchronize strobe and/or horn by using Gentex AVSM control module
  • Prewire entire system, install mountin bracket, install signal
  • Input terminals of 12 to 18 AWG
  • Switch selection for high or low dBA
  • Switch selection for chime, whoop, 2400Hz or mechanical tone
  • Switch selection for continuous or temporal 3 audible signal
  • Tamperproof re-entrant grill
  • Silence audible while visual appliance will remain flashing
  • Rugged die cast metal mounting bracket
  • GOE and GOELP made of clear Lexan® providing maximum visibility and reliability for effective visible signaling
  • Faceplate available in red or off-white

GX93 Series

The GX93 Series is a high quality remote audible signaling appliance that offers dependable remote annunciation. The GX93 is ideal for applications where a dependable audible alarm signal is required in applications such as hotels, dormitories and apartments. Listed to ANSI/UL 464, CAN/ULC listed, applicable IBC/IFC/IRC Standards and NFPA 72.

Standard Features

  • Field selectable 12VDC or 24VDC operation
  • Jumper selectable temporal 3 or continuous tone
  • Horn frequency is 3100Hz
  • Terminal Blocks (12AWG to 18AWG)
  • Synchronize horn by using Gentex AVSM control module
  • Variety of mounting options for new construction and retrofit applications
  • Faceplate available in red or off-white
Syndicate content